Model No: SSIA-025
Specifications:
- Vertical Autoclave Top Loading Autoclave approximate dimension Ø30 x 50 cm (35 ltr approx).
- Autoclave Chamber, lid & all other wetted parts should of stainless steel SS304.
- Autoclave lid Fly nut locking system for lid. Flynut used insulated material (industrial plastic)- cool to touch type.
- Autoclave Lid Stainless steel pressure gauge with dual range in kPA and PSI psi along with a co-related temperature scale in degrees Celsius.
- Autoclave low water level sensing & cut off.
- Autoclave Ball design drain valve for cleaning, on rear side.
- Autoclave lid fitted with a Unique Purge valve cum vacuum breaker on lid for automatic purging.
- Autoclave lid fitted with Manual exhaust valve for steam release Valve Knob should be cool to touch and with indents for a comfortable grip.
- Autoclave hydraulic die press lid from stainless steel plate & all fittings should be on the lid. Autoclave Industrial grade energy efficient ring type heater.
- Autoclave chamber all joints should be TIG welded with inert gas and smooth finished for crevice free internals.
- Autoclave a dual LED display Digital PID temperature controller with PT100 sensor for precise monitoring & control.
- The PID controller prefixed at 121°C for 20 minutes.
- The PID controller resolution of 1°C
- Autoclave chamber hydro statically tested at 1.5 times of its working pressure.
- The Vertical Autoclave is pressure equipment & hence from safety point of view chamber designed as per ASME guidelines & PED certified.
- Autoclave safety valve fitted on lid set at 20 PSI respectively.
- Autoclave give sensor open alarm in case of sensor fault.
- Autoclave cut of the heater at the end of cycle.
- Autoclave supplied with one wire mesh carrier of stainless steel with separator.
- Autoclave supplied with Calibration report for pressure gauge & controller traceable up to NABL.
- ISO 13485 certified.
- Supply: 230Vac, Single Phase, 50Hz
